NLAS4052DTR2
| Parameters | |
|---|---|
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V ±3V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 140MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Signal Current-Max | 0.05A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NLAS4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
NLAS4052DTR2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. There are 16 pins injected into the electronic part body. SP4T switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with NLAS4052. In this multiplexer, the internal resistance is 33Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. Digital switch that provides Dual, Single power at a cost-effective price. The analogue multiplexer could operate on 40μA current. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
NLAS4052DTR2 Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
-3db Bandwidth: 140MHz
NLAS4052DTR2 Applications
There are a lot of ON Semiconductor NLAS4052DTR2 Analog Switches & Multiplexers ICs applications.
- Cell phones
- Private Branch Exchange (PBX)
- Multiplexers
- Battery Powered Instruments
- Frame Relay Equipment
- RGB switches
- Cross Connects
- Precision data acquisition
- Optical Applications
- Public switching systems
