NLAS4052QSR
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V ±3V |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 140MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
NLAS4052QSR Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. 16 terminations have been made so far. By its 4 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. A 2 circuit is present in this switch device. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
NLAS4052QSR Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 140MHz
NLAS4052QSR Applications
There are a lot of Rochester Electronics, LLC NLAS4052QSR Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- HDTV
- Digital Cross-Connects
- DSUs
- Audio and video signal routing
- Microprocessor controlled systems
- Audio signal routing
- Cell phones
- Communication systems
- Battery Powered Systems
