NLAS4052QSR
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V ±3V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 140MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | NLAS4052 |
| Pin Count | 16 |
NLAS4052QSR Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -55°C~125°C TA. A total of 16 terminations have been recorded. Due to its 4 channels, the electrical component produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SP4T switching circuits. 2 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with NLAS4052. It has an internal resistance of 33Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Analogue multiplexers of the Dual, Single supply type that are cost-effective. For this multiplexer to operate, 40μA current would be sufficient. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.
NLAS4052QSR Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
-3db Bandwidth: 140MHz
NLAS4052QSR Applications
There are a lot of ON Semiconductor NLAS4052QSR Analog Switches & Multiplexers ICs applications.
- Medical
- T1/E1 Terminals
- Signal routing between systems
- High reliability control systems
- SDH/SONET multiplexers
- DVD-R
- ATM
- Audio and video signal routing
- Sample-and-hold systems
- PBXs
