NLAS4053DR2
| Parameters | |
|---|---|
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NLAS4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Bandwidth | 145MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
NLAS4053DR2 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPDT switching circuits. The circuits in this analogue multiplexer number 3. Try searching for NLAS4053 variants of the analog switch ic. In this multiplexer, the internal resistance is 33Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An effective Dual, Single supply digital multiplexer. The analogue multiplexer could operate on 40μA current. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating voltages of 5.5V are compatible with the electrical part. It is possible to transfer data over a 145MHz-bandwidth.
NLAS4053DR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 180MHz
Bandwidth: 145MHz
NLAS4053DR2 Applications
There are a lot of ON Semiconductor NLAS4053DR2 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Fiber to the Home
- Microprocessor Controlled Analog Systems
- Cable Modem
- Microprocessor controlled systems
- Channel Banks
- PBX interfaces
- Sample-and-hold systems
- Video switching
- PDH Multiplexers
