NLAS4053DTR2

23ns, 23ns SPDT 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4053 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-NLAS4053DTR2
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 794
Description: 23ns, 23ns SPDT 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4053 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Voltage - Supply, Single/Dual (±)	3V~5V ±3V
Supply Type	Dual, Single
Bandwidth	145MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3.3V
-3db Bandwidth	180MHz
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 23ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	28ns
Switch-off Time-Max	28ns
Signal Current-Max	0.05A
Height Seated (Max)	1.2mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free
Lifecycle Status	OBSOLETE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	33Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	NLAS4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	450mW
Throw Configuration	DPST
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6

NLAS4053DTR2 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. In total, there are 16 terminations. By its 2 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching with NLAS4053 to find analog multiplexer variants. Analog switches have 33Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2.5V. The analogue multiplexer could operate on 40μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 3.3V. With dual power supplies, you should attach at least 1.25V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. A 6 input needs to be operated. There are various bandwidths available for data transfer.