Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
33Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS4053 |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
40μA |
Nominal Supply Current |
4μA |
Power Dissipation |
450mW |
Throw Configuration |
SPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
3V~5V ±3V |
Halogen Free |
Halogen Free |
Supply Type |
Dual, Single |
Bandwidth |
145MHz |
Supply Current-Max (Isup) |
0.08mA |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3.3V |
-3db Bandwidth |
180MHz |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Dual Supply Voltage |
3V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
23ns, 23ns |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
28ns |
Switch-off Time-Max |
28ns |
Signal Current-Max |
0.05A |
Height Seated (Max) |
1.2mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAS4053DTR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. As a result of its 2 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 3 circuits make up this switch device. NLAS4053 can be used to search for analog multiplexer variants. Analog switches have 33Ohm internal resistance. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.5V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 40μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 3.3V. If you are using dual power supplies, you should attach at least 1.25V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. It is possible to operate 6 inputs. There are various bandwidths available for data transfer.
NLAS4053DTR2G Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 180MHz
Bandwidth: 145MHz
NLAS4053DTR2G Applications
There are a lot of ON Semiconductor NLAS4053DTR2G Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Avionics test equipment
- Fiber to the Home
- Digital access cross connects
- Public switching systems
- DVD-R
- Automatic test equipment
- HDTV
- Routers
- Existing multiplexer applications (both fault-protected and nonfault-protected)