Parameters |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
4μA |
Power Dissipation |
450mW |
Turn On Delay Time |
35 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Turn-Off Delay Time |
12 ns |
-3db Bandwidth |
175MHz |
On-State Resistance (Max) |
25Ohm |
Multiplexer/Demultiplexer Circuit |
2:2 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
10μA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
Switch Circuit |
DPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 5ns |
Charge Injection |
3pC |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NC |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
Lifecycle Status |
OBSOLETE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS44599 |
Pin Count |
16 |
Number of Outputs |
8 |
NLAS44599DTR2 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:2. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. It is injected into the electrical part body with 16 pins. Multiplexers built on a DPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with NLAS44599. Internally, this switch multiplexer has a resistance of 30Ohm. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 4μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The electrical part can be operated at 5V voltage levels. Operating the 4 inputs requires 4 inputs. A analog switch ics with 8 outputs is included.
NLAS44599DTR2 Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAS44599DTR2 Applications
There are a lot of ON Semiconductor NLAS44599DTR2 Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- MP3 players
- Cross Connects
- Fiber In The Loop (FITL)
- Power routing
- E1 Network Equipment
- Medical
- Automatic test equipment
- Modems
- Residential Gateways, Home Gateway/Router