NLAS44599MN
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn90Pb10) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NLAS44599 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 800mW |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
NLAS44599MN Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. 2:2 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -55°C~125°C TA. Totally, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. An 2.5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on DPDT switching circuits. Use NLAS44599 to search for variants of the digital switches. A 30Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 4μA current. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 4 inputs. A analog switch ics with 8 outputs is included.
NLAS44599MN Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAS44599MN Applications
There are a lot of ON Semiconductor NLAS44599MN Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Relay replacements
- Battery-powered systems
- High reliability control systems
- Remote wireless modules
- Sample-and-hold systems
- Low-Voltage
- Multiplexers
- Battery Powered Systems
- Routers
