Parameters |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2005 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Gold/Palladium (Ni/Au/Pd) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
800mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS44599 |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
4μA |
Power Dissipation |
800mW |
Turn On Delay Time |
35 ns |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Turn-Off Delay Time |
12 ns |
-3db Bandwidth |
175MHz |
On-State Resistance (Max) |
25Ohm |
Multiplexer/Demultiplexer Circuit |
2:2 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
10μA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
Switch Circuit |
DPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 5ns |
Charge Injection |
3pC |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NC |
Height Seated (Max) |
1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
NLAS44599MNG Overview
This electronic part is conveniently packaged in 16-VFQFN Exposed Pad, making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. There is 2:2 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. A electrical component with 2 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. This electronic part can be found in the 16 series. These analog multiplexers are built based on DPDT switching circuits. NLAS44599 can be used to search for analog multiplexer variants. There is 30Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 4μA current would suffice. Using a single voltage supply, this switch device consumes 2V~5.5V volts. 5V operating voltages are supported by the electronic component. There are 4 inputs to be operated. Multiplexer ics with 8 outputs are available.
NLAS44599MNG Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAS44599MNG Applications
There are a lot of ON Semiconductor NLAS44599MNG Analog Switches & Multiplexers ICs applications.
- Medical
- DSLAMs
- E1 Multiplexer
- Avionics test equipment
- ISDN NT1/TA
- Precision instrumentation
- Central office
- Communication systems
- Remote wireless modules
- New designs requiring multiplexer functions