NLAS4599DTT1
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 30Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NLAS4599 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Power Dissipation | 200mW |
| Turn On Delay Time | 28 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAS4599DTT1 Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6 Thin, TSOT-23-6. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around -55°C~125°C TA. There are 6 terminations totally. The electronic part delivers high-quality output through its 1 channels. A 4.5V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 6 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with NLAS4599 if you're looking for variants. Internally, this switch multiplexer has a resistance of 30Ohm. Please refer to the datasheets for 6 pins functions. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. In order to operate this switch device, it would need a current of 1μA. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. It can operate from 5V operating voltages. 2 outputs are included in the analogue multiplexer.
NLAS4599DTT1 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 220MHz
NLAS4599DTT1 Applications
There are a lot of ON Semiconductor NLAS4599DTT1 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- DSUs
- Central office
- Industrial control systems
- DVD-R
- Frame Relay Equipment
- Switching Systems
- Sample hold systems
- ISDN NT1/TA
- PCMCIA cards
