NLAS4783BMN1R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.2Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS4783 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Power Supplies | 1.8/4V |
| Number of Channels | 3 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 25 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 17MHz |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 27ns, 20ns |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω (Max) |
| Crosstalk | -62dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 27ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS4783BMN1R2G Overview
This electronic part is conveniently packaged in 16-VFQFN Exposed Pad, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 16 terminations. This electronic part offers high-quality output due to its 3 channels. With a 2.7V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with NLAS4783 if you are looking for variants. As far as internal resistance is concerned, it has 1.2Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 4.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. A low voltage of 1.65V should be applied to the electronic component. This multiplexer would work with 2μA current. Analogue multiplexers require a 1.65V~4.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating voltages of 3V are compatible with the electrical part.
NLAS4783BMN1R2G Features
3 Channels
Switch Circuit: SPDT
2μA Supply Current
-3db Bandwidth: 17MHz
NLAS4783BMN1R2G Applications
There are a lot of ON Semiconductor NLAS4783BMN1R2G Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Audio and video signal routing
- Fiber to the Home
- Sample-and-hold systems
- SDH/SONET multiplexers
- Multi-Line E1 Interface Cards
- Relay Replacement
- High-Voltage
- Power routing
- SDH
