NLAS4783MN1R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.2Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS4783 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3V |
| Number of Channels | 3 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2μA |
| Turn On Delay Time | 25 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 17MHz |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 27ns, 20ns |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω (Max) |
| Crosstalk | -62dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 27ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Normal Position | NC |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS4783MN1R2G Overview
This electronic part is conveniently packaged in 16-VFQFN Exposed Pad, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. A electrical component with 3 channels is capable of high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with NLAS4783 if you are looking for variants. In this multiplexer, the internal resistance is 1.2Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Single supply type digital switch with a low cost. 1.65V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 2μA. A voltage of 1.65V~4.5V is required for this switch device, which drains from a single voltage source. Operating voltages of 3V are compatible with the electrical part. A analog switch ics with 6 outputs is included.
NLAS4783MN1R2G Features
3 Channels
Switch Circuit: SPDT
2μA Supply Current
-3db Bandwidth: 17MHz
NLAS4783MN1R2G Applications
There are a lot of ON Semiconductor NLAS4783MN1R2G Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Transmit
- New designs requiring multiplexer functions
- Voice over IP/DSL – Integrated Access Devices, Smart
- Multi-Line E1 Interface Cards
- MP3 players
- Microprocessor controlled systems
- ATM
- Relay Replacement
