NLAS5123MUR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS5123 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 500nA |
| Turn On Delay Time | 20 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 55MHz |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 20ns, 15ns |
| Charge Injection | 48pC |
| Channel-to-Channel Matching (ΔRon) | 120m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height | 500μm |
| Length | 1.2mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS5123MUR2G Overview
This electronic part is conveniently packaged in 6-UFDFN, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 6. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 2.7V, it should be turned on and run. A total of 6 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. Try searching for NLAS5123 variants of the analog switch ic. There is 1Ohm internal resistance in this digital multiplexer. Datasheets for functions of 6 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 1.65V. For this digital switch to work, 500nA current would suffice. Using only a single voltage supply, this analog switch requires 1.65V~4.5V voltage. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. In order to operate the 1 inputs, there are several steps to follow. The analog switch ics includes 2 outputs.
NLAS5123MUR2G Features
1 Channels
Switch Circuit: SPDT
500nA Supply Current
-3db Bandwidth: 55MHz
NLAS5123MUR2G Applications
There are a lot of ON Semiconductor NLAS5123MUR2G Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Residential Gateways, Home Gateway/Router
- SONET
- PCMCIA cards
- Channelized and Unchannelized DS3 applications
- Audio and video signal routing
- Ultrasound
- Audio/video switches
- Fault Tolerant Systems
- Industrial
