NLAS5157MUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 350mOhm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | NLAS5157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 100nA |
| Turn On Delay Time | 30 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 18 ns |
| -3db Bandwidth | 36MHz |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Channel Capacitance (CS(off), CD(off)) | 47pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 25ns |
| Charge Injection | 38pC |
| Channel-to-Channel Matching (ΔRon) | 80m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height | 500μm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS5157MUTCG Overview
Due to its 6-UFDFN packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 6. An injection of 6 pins is performed into the body of the electrical component. Circuits based on SPDT switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with NLAS5157. An switch multiplexer with 350mOhm internal resistance has a value of 350mOhm. The datasheets for the 6 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 4.3V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 100nA. A voltage of 1.65V~4.5V is required for this switch device, which drains from a single voltage source. 3V operating voltages can be used with this electrical part. Operating 1 inputs is required. This digital multiplexer has 2 outputs.
NLAS5157MUTCG Features
Switch Circuit: SPDT
100nA Supply Current
-3db Bandwidth: 36MHz
NLAS5157MUTCG Applications
There are a lot of ON Semiconductor NLAS5157MUTCG Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Multi-Line E1 Interface Cards
- High-Voltage
- High speed data transmission line cards
- Channel Banks
- Residential Gateways, Home Gateway/Router
- DVD-R
- Low-Voltage
- Battery Powered Systems
- Communication systems
