NLAS5213AUSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 22 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 1.3Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | NLAS5213 |
| Pin Count | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 20 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 496MHz |
| On-State Resistance (Max) | 1.3Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Channel Capacitance (CS(off), CD(off)) | 19pF |
| On-state Resistance Match-Nom | 0.16Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 15ns |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS5213AUSG Overview
Presented in 8-VFSOP (0.091, 2.30mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. The electrical component body receives 8 pins. Based on DPST - NO switching circuits, these analog multiplexers work. Circuits number 1 make up this analogue multiplexer. Using the NLAS5213 search parameter, you can discover variants of the switch. It has an internal resistance of 1.3Ohm. You can find the functions of the 8 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 4.5V voltage to the switch device. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 1.65V. The analogue multiplexer could operate on 1μA current. A voltage of 1.65V~4.5V is required to drain this analog switch from a single voltage supply. The electrical part can be operated at 3V voltage levels. A 2 input needs to be operated.
NLAS5213AUSG Features
1 Channels
Switch Circuit: DPST - NO
1μA Supply Current
-3db Bandwidth: 496MHz
NLAS5213AUSG Applications
There are a lot of ON Semiconductor NLAS5213AUSG Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- PBXs
- Communication systems
- Private Branch Exchange (PBX)
- Avionics test equipment
- Sample-and-hold systems
- Medical
- Microwave transmission systems
- Wireless Local Loop
- Data Acquisition Systems
