NLAS5213BUSG
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 1.3Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | NLAS5213 |
| Pin Count | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100pA |
| Throw Configuration | SPST |
| Turn On Delay Time | 20 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 496MHz |
| On-State Resistance (Max) | 1.3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 19pF |
| On-state Resistance Match-Nom | 0.16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 15ns |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 0.9mm |
NLAS5213BUSG Overview
Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 8 terminations. The electronic part provides high-quality output because it has 2 channels. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 8 pins. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with NLAS5213. As far as internal resistance is concerned, it has 1.3Ohm. For details about the functions of 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 4.5V in normal situations. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. The analogue multiplexer could operate on 1μA current. Using a single voltage supply, this switch device consumes 1.65V~4.5V volts. There is a voltage range of 3V operating voltages for the electrical part. The electrical component supports 2 inputs.
NLAS5213BUSG Features
2 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 496MHz
NLAS5213BUSG Applications
There are a lot of ON Semiconductor NLAS5213BUSG Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Precision data acquisition
- Digital Cross-Connects
- Signal routing between systems
- Battery Powered Systems
- USB 1.1 signal switching circuits
- Automatic test equipment
- Microwave transmission systems
- Relay replacements
- Private Branch Exchange (PBX)
