NLAS52231MUR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 10.007382mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 430mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS52231 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 36MHz |
| On-State Resistance (Max) | 430mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 39pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 53pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω (Max) |
| Crosstalk | -88dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS52231MUR2G Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 10. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 10 series, this electronic part has been incorporated into the system. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with NLAS52231. It has an internal resistance of 430mOhm. Datasheets for functions of 10 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 4.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. There should be 1.65V voltage fed to the electrical part below 1.65V. This digital switch can be operated with a current of 1μA. A voltage of 1.65V~4.5V is required for this switch device, which drains from a single voltage source. It may damage the digital multiplexer if the voltage is higher than 1μA. The 2 inputs need to be operated in order to work. The analog switch ics includes 4 outputs.
NLAS52231MUR2G Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 36MHz
NLAS52231MUR2G Applications
There are a lot of ON Semiconductor NLAS52231MUR2G Analog Switches & Multiplexers ICs applications.
- DSLAMs
- HDTV
- SONET/SDH ADM
- Cable PC
- Modems
- Fiber In The Loop (FITL)
- Access Concentrators
- Avionics test equipment
- Automatic test equipment
- Routers
