NLAS5223LMNR2G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 10 |
| JESD-30 Code | R-XQCC-N10 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 17MHz |
| On-State Resistance (Max) | 300mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 75pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 38pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω (Max) |
| Crosstalk | -70dB @ 100kHz |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 0.8mm |
| Length | 1.8mm |
| RoHS Status | ROHS3 Compliant |
NLAS5223LMNR2G Overview
The electrical component comes in 10-WFQFN packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, 10 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. A key feature of the 10 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. It consists of 2 circuits. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V.
NLAS5223LMNR2G Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 17MHz
NLAS5223LMNR2G Applications
There are a lot of Rochester Electronics, LLC NLAS5223LMNR2G Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Frame Relay Equipment
- Fiber to the Home
- Cable Modem
- Digital cross connects (DSX-1)
- High speed data transmission line cards
- Industrial control systems
- Channel Banks
- PCMCIA cards
- Communication systems
