NLAS6233MUTBG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 550mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAS6233 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.5V |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Supply Type | Single |
| -3db Bandwidth | 36MHz |
| On-State Resistance (Max) | 550mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 45pF |
| On-state Resistance Match-Nom | 0.19Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 17ns, 9ns |
| Channel-to-Channel Matching (ΔRon) | 190m Ω |
| Crosstalk | -98dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~4.5V |
| Height Seated (Max) | 0.6mm |
| Length | 1.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS6233MUTBG Overview
The electronic component is convenient to ship overseas because it is packed in a 10-UFQFN. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 2:2 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. In total, there are 10 terminations. A electrical component with 2 channels is capable of high-quality output. Powered by a 4.2V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 10 series. On the other hand, analog switches can be constructed using DPDT switching circuits. There are 2 circuits in this multiplexer. Search with NLAS6233 if you are looking for analog multiplexer variants. Analog switches have 550mOhm internal resistance. Please refer to the datasheets for 10 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. Digital switch that provides Single power at a cost-effective price. Using only a single voltage supply, this analog switch requires 2.7V~4.5V voltage. There are SEPARATE OUTPUT outputs on this analog switch ic.
NLAS6233MUTBG Features
2 Channels
Switch Circuit: DPDT
-3db Bandwidth: 36MHz
NLAS6233MUTBG Applications
There are a lot of ON Semiconductor NLAS6233MUTBG Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Microprocessor controlled systems
- PDH Multiplexers
- PDAs
- Microwave transmission systems
- Battery Powered Instruments
- Fiber In The Loop (FITL)
- SDH/SONET multiplexers
- Cell phones
- Medical
