NLAST4051DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAST4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 95MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Drain to Source Resistance | 86mOhm |
| Signal Current-Max | 0.05A |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAST4051DR2 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 8 channels. A 3V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with NLAST4051. Analog switches have 33Ohm internal resistance. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. The digital multiplexer has a low cost Dual, Single supply. The switch device would be able to operate with 40μA current. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Check out the electrical component's additional features, such as the following: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY. There is 86mOhm Drain to Source resistance on this electronic part.
NLAST4051DR2 Features
8 Channels
40μA Supply Current
-3db Bandwidth: 95MHz
Additional Features: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY
Drain-to-Source resistance: 86mOhm
NLAST4051DR2 Applications
There are a lot of ON Semiconductor NLAST4051DR2 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Communications systems
- Industrial control systems
- Transmit
- Video switching
- Audio signal routing
- Avionics test equipment
- Residential Gateways, Home Gateway/Router
- Video signal routing
- Precision data acquisition
