Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
86Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
8 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAST4051 |
Pin Count |
16 |
Power Supplies |
-3.3/GND3.3/5V |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
40μA |
Nominal Supply Current |
4μA |
Power Dissipation |
450mW |
Throw Configuration |
SP8T |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
3V~5V ±3V |
Halogen Free |
Halogen Free |
Supply Type |
Dual, Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3.3V |
-3db Bandwidth |
95MHz |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Dual Supply Voltage |
3V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Time (Ton, Toff) (Max) |
23ns, 23ns |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switch-on Time-Max |
50ns |
Switch-off Time-Max |
50ns |
Signal Current-Max |
0.05A |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAST4051DTR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. A total of 16 terminations have been recorded. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. This multiplexer is composed of 1 circuits. Try searching for the analog switch ic with NLAST4051 if you are looking for variants. A 86Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 2.5V. An operating current of 40μA would be sufficient for this switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 3.3V. With dual power supplies, you should attach at least 1.25V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating the 8 inputs requires 8 inputs. The transfer of data can be performed over 80MHz bandwidths. This electronic part has additional features, such as: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY.
NLAST4051DTR2G Features
1 Channels
40μA Supply Current
-3db Bandwidth: 95MHz
Bandwidth: 80MHz
Additional Features: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY
NLAST4051DTR2G Applications
There are a lot of ON Semiconductor NLAST4051DTR2G Analog Switches & Multiplexers ICs applications.
- Cell phones
- Wireless Local Loop
- Microprocessor Controlled Analog Systems
- Multiplexers
- Central office
- Audio and video signal routing
- Industrial control systems
- Transmit
- Remote Powered Equipment
- Intelligent PBX