NLAST4051QSR
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.64mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAST4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 95MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Signal Current-Max | 0.05A |
| Length | 4.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAST4051QSR Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature around -55°C~125°C TA extended. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. There are 1 circuits in this switch device. Use NLAST4051 to search for variants of the digital switches. In this multiplexer, the internal resistance is 33Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An effective Dual, Single supply digital multiplexer. An operating current of 40μA would be sufficient for this switch device. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Check out the electrical component's additional features, such as the following: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY.
NLAST4051QSR Features
8 Channels
40μA Supply Current
-3db Bandwidth: 95MHz
Additional Features: ALSO OPERATES WITH 2.5V TO 6.6V (VCC-VEE) SUPPLY
NLAST4051QSR Applications
There are a lot of ON Semiconductor NLAST4051QSR Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- FTTH
- Optical Applications
- Cell phones
- Cable Modem
- Microwave transmission systems
- Precision test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SONET/SDH ADM
- SONET
