Parameters |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
23ns, 23ns |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Signal Current-Max |
0.05A |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
33Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
3V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NLAST4052 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Power Supplies |
-3.3/GND3.3/5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
40μA |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
3V~5V ±3V |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
0.08mA |
Neg Supply Voltage-Nom (Vsup) |
-3V |
-3db Bandwidth |
140MHz |
On-State Resistance (Max) |
26Ohm |
NLAST4052DR2 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 4:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -55°C~125°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with NLAST4052. Internally, this switch multiplexer has a resistance of 33Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. This digital switch can be operated with a current of 40μA. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER.
NLAST4052DR2 Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
-3db Bandwidth: 140MHz
NLAST4052DR2 Applications
There are a lot of ON Semiconductor NLAST4052DR2 Analog Switches & Multiplexers ICs applications.
- DSUs
- Medical
- ATM
- Battery Powered Systems
- Sample-and-hold systems
- SDH
- Medical Instrumentation
- Access Concentrators
- Digital Cross-Connects
- Voice over IP/DSL – Integrated Access Devices, Smart