NLAST4052QSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAST4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 140MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAST4052QSR Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching with NLAST4052 if you're looking for variants. It has an internal resistance of 33Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A analog switch ic that has a cost-effective Dual, Single supply type. The analogue multiplexer could operate on 40μA current. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
NLAST4052QSR Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
-3db Bandwidth: 140MHz
NLAST4052QSR Applications
There are a lot of ON Semiconductor NLAST4052QSR Analog Switches & Multiplexers ICs applications.
- SONET
- ISDN NT1/TA
- HDTV
- SDH
- High reliability control systems
- Audio/video switches
- Frame Relay Equipment
- Microprocessor Controlled Analog Systems
- Access Concentrators
- Modems
