NLAST4053DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | NLAST4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAST4053DR2 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -55°C~125°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 2 channels. An 3V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 3 circuits. Use NLAST4053 to search for variants of the digital switches. It has an internal resistance of 33Ohm. Please refer to the datasheets for 16 pins functions. An effective Dual, Single supply digital multiplexer. The switch device would be able to operate with 40μA current. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
NLAST4053DR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 180MHz
NLAST4053DR2 Applications
There are a lot of ON Semiconductor NLAST4053DR2 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Cellular phones
- New designs requiring multiplexer functions
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Remote Powered Equipment
- Communication systems
- Mechanical reed relay replacement
- Battery-powered systems
- Relay replacements
- Avionics
