NLAST4053DTR2
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 3V~5V ±3V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | NLAST4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Multiplexer |
NLAST4053DTR2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. A total of 16 terminations have been recorded. A 2 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. It consists of 3 circuits. Try searching with NLAST4053 if you're looking for variants. There is 33Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Analog switch ics with Dual, Single supply type are cost-effective. For this digital switch to work, 40μA current would suffice. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
NLAST4053DTR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 180MHz
NLAST4053DTR2 Applications
There are a lot of ON Semiconductor NLAST4053DTR2 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Digital access cross connects
- Medical
- Remote wireless modules
- Relay Replacement
- E1 Network Equipment
- Audio and video signal routing
- Cable Modem
- CSU
- Wireless Local Loop
