NLAST44599DTG
| Parameters | |
|---|---|
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAST44599 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 450mW |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
NLAST44599DTG Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 2:2. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. By its 2 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. The electronic part body is injected with 16 pins. A DPDT switching circuit is used to build these analog multiplexers. Use NLAST44599 to search for variants of the digital switches. A 30Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 4μA current. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. The electrical part can be operated at 5V voltage levels. There are 4 inputs to be operated. The analog switch ics has 8 outputs.
NLAST44599DTG Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAST44599DTG Applications
There are a lot of ON Semiconductor NLAST44599DTG Analog Switches & Multiplexers ICs applications.
- DSUs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Imaging
- Precision data acquisition
- Communication systems
- High reliability control systems
- PDH Multiplexers
- DSLAMs
- Communication systems
- ISDN NT1/TA
