NLAST44599DTR2G
| Parameters | |
|---|---|
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAST44599 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 450mW |
| Max Supply Current | 4μA |
| Turn On Delay Time | 14 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
NLAST44599DTR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:2 represents the number of circuits. The operating temperature is extended to around -55°C~125°C TA. In total, there have been 16 terminations. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. Into the electrical component body are injected 16 pins. Multiplexers built on a DPDT switching circuit are built. Try searching with NLAST44599 to find analog multiplexer variants. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. This multiplexer would work with 4μA current. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 4μA. A 4 input needs to be operated. The analog switch ics includes 8 outputs.
NLAST44599DTR2G Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAST44599DTR2G Applications
There are a lot of ON Semiconductor NLAST44599DTR2G Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cell phones
- Automatic test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- Multi-Line E1 Interface Cards
- Digital access cross connects
- PBX interfaces
- Digital cross connects (DSX-1)
- Channelized and Unchannelized DS3 applications
- Central office
