NLAST44599MNG
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAST44599 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Nominal Supply Current | 4μA |
| Power Dissipation | 800mW |
| Max Supply Current | 4μA |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAST44599MNG Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:2. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. 16 pins are injected to the electronic part body. A DPDT switching circuit is used to build these analog multiplexers. Try searching with NLAST44599 to find analog multiplexer variants. A 30Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 4μA. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 4μA. Operating voltages of 3V are compatible with the electrical part. A 4 input needs to be operated. An output of 8 is provided by the digital multiplexer.
NLAST44599MNG Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAST44599MNG Applications
There are a lot of ON Semiconductor NLAST44599MNG Analog Switches & Multiplexers ICs applications.
- Isolation
- Access Concentrators
- Audio/video switches
- Sample-and-hold systems
- Audio signal routing
- Wireless Local Loop
- Battery-powered systems
- SONET/SDH ADM
- Precision test equipment
- Mechanical reed relay replacement
