NLAST44599MNR2
| Parameters | |
|---|---|
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 800mW |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 175MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 5ns |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn90Pb10) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NLAST44599 |
NLAST44599MNR2 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-VFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:2. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. A 2 channel electronic part produces high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on DPDT switching circuits. Search with NLAST44599 if you are looking for analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 4μA. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. 5V operating voltages can be used with this electrical part. The electrical component supports 4 inputs. The analogue multiplexer has 8 outputs.
NLAST44599MNR2 Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 175MHz
NLAST44599MNR2 Applications
There are a lot of ON Semiconductor NLAST44599MNR2 Analog Switches & Multiplexers ICs applications.
- Communications systems
- E1 Multiplexer
- High-Voltage
- Routers
- Remote Powered Equipment
- Residential Gateways, Home Gateway/Router
- Sample hold systems
- Audio and video routing
- PDH Multiplexers
- DVD-R
