Parameters |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Turn-Off Delay Time |
22 ns |
-3db Bandwidth |
220MHz |
On-State Resistance (Max) |
25Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
9ns, 10ns |
Charge Injection |
3pC |
Switching |
MAKE-BEFORE-BREAK |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NO |
Length |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
30Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
150mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAST4501 |
Pin Count |
5 |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Power Dissipation |
150mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
14 ns |
NLAST4501DFT2G Overview
Shipping overseas is convenient with the electronic component packed in 5-TSSOP, SC-70-5, SOT-353. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -55°C~125°C TA. Total terminations are 5. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A key feature of the 5 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with NLAST4501 to find analog multiplexer variants. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. You can find the functions of the 5 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. It may damage the digital multiplexer if the voltage is higher than 1μA. Operating voltages of 5V are compatible with the electrical part.
NLAST4501DFT2G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 220MHz
NLAST4501DFT2G Applications
There are a lot of ON Semiconductor NLAST4501DFT2G Analog Switches & Multiplexers ICs applications.
- MP3 players
- Digital cross connects (DSX-1)
- Cell phones
- Voice over IP/DSL – Integrated Access Devices, Smart
- Avionics
- FTTH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Imaging
- Ultrasound
- Digital Cross-Connects