NLAST4501DTT1G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 30Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAST4501 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Power Dissipation | 200mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 220MHz |
| Turn-Off Delay Time | 22 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 9ns, 10ns |
| Charge Injection | 3pC |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAST4501DTT1G Overview
As the electronic part is packed in SOT-23-5 Thin, TSOT-23-5, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 5. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. The electrical component body receives 5 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with NLAST4501 if you are looking for variants. A 30Ohm internal resistance characterizes this multiplexer. You can find the functions of the 5 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 1μA current. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. The data can be transferred over a wide range of bandwidths, called 220MHz bandwidths.
NLAST4501DTT1G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Bandwidth: 220MHz
NLAST4501DTT1G Applications
There are a lot of ON Semiconductor NLAST4501DTT1G Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Public switching systems
- Multiplexers
- Microprocessor controlled systems
- Low-Voltage
- Wireless Local Loop
- HDTV
- Isolation
- Multi-Line E1 Interface Cards
- DSUs
