NLAST9431MTR2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | NLAST9431 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 4μA |
| Power Dissipation | 800mW |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAST9431MTR2G Overview
Shipping overseas is convenient with the electronic component packed in 16-WFQFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 2:2 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. 16 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. A 2.5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. Multiplexers built on a DPDT switching circuit are built. This multiplexer is composed of 1 circuits. Search with NLAST9431 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 30Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 4μA current would suffice. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 5V operating voltages for the electrical part. It is possible to operate 4 inputs.
NLAST9431MTR2G Features
2 Channels
Switch Circuit: DPDT
4μA Supply Current
-3db Bandwidth: 200MHz
NLAST9431MTR2G Applications
There are a lot of ON Semiconductor NLAST9431MTR2G Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Fiber In The Loop (FITL)
- Audio and video routing
- PDH Multiplexers
- Medical Instrumentation
- Fiber to the Home
- PBX interfaces
- SONET
- Multi-Line E1 Interface Cards
- Digital access cross connects
