NLSF1174MNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSF1174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 19 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.00002 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSF1174MNR2G Overview
The flip flop is packaged in 16-VFQFN Exposed Pad. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. A frequency of 35MHzshould be the maximum output frequency. There are 1 elements in it. There is 4μA quiescent consumption. There have been 16 terminations. The NLSF1174family includes it. The power supply voltage is 4.5V. Its input capacitance is 10pFfarads. There is an electronic part mounted in the way of Surface Mount. There are 16pins on it. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. There are 6bits in this flip flop. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 7 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. In order for the chip to function, it has 6output lines.
NLSF1174MNR2G Features
Tape & Reel (TR) package
16 pins
6 Bits
NLSF1174MNR2G Applications
There are a lot of ON Semiconductor NLSF1174MNR2G Flip Flops applications.
- Synchronous counter
- Memory
- Data storage
- Buffer registers
- Circuit Design
- Patented noise
- Guaranteed simultaneous switching noise level
- Common Clocks
- Counters
- Communications
