NLSF3T125MNR2
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Power Dissipation-Max | 500mW |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 11.5 ns |
| Family | 3T |
| Logic Function | Buffer, Inverting |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Control Type | ENABLE LOW |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 16 |
| Published | 2004 |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
NLSF3T125MNR2 Overview
Logical driver uses a neat QFN package. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Family 3T includes the buffer IC . 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct 8mA of current. Voltage used to run voltage buffer should be 2V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Wireless transceiver is able to output 3 lines. Because of its 4 lines level input capability, buffer IC is more cost-effective on transimitting signals. It is known as a BUS DRIVER logic IC.
NLSF3T125MNR2 Features
Bus Driver/Transceivers
High Level Output: 8mA
Low Level Output: 8mA
BUS DRIVER Logic IC
NLSF3T125MNR2 Applications
There are a lot of ON Semiconductor NLSF3T125MNR2 Buffers & Transceivers applications.
- Broadcast application
- Fiber optic cable connection network
- TV signal transmission
- Laser diode bonding
- Portable radio
- Cordless telephone
- LAN, SAN, WAN (local, storage, work area networks)
- Switches/bridges/routers/servers
- Changeing the frequency from IF to RF
- AV receiver
