NLSF595DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSF595 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 450mW |
| Max Supply Current | 75mA |
| Current - Output / Channel | 12mA |
| Internal Switch(s) | Yes |
| Number of Segments | 3 |
| Voltage - Supply (Min) | 2V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLSF595DTR2 Overview
On the board, there is also a 16-TSSOP (0.173, 4.40mm Width) package that saves space.For the design of these LED drivers, 8 outputs are used.Surface Mount is used to mount the led light driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is capable of operating at a temperature of -55°C~125°C TA. It operates on the basis of the frequency of 150MHz.A termination of 16 is used to operate the LED driver.The LED light driver is configured with a base of 0 pins.In the absence of a voltage supply of at least 2V, undetermined failures may occur.A total of 3 segments have been created.The device has been mounted on the Surface Mount.The base part number for this LED driver is NLSF595.The supply voltage of 5.5V is an acceptable maximum value.There are 16 pins on it.According to its characteristics, it is also classified into Display Drivers.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2V.As long as the supply current is less than 75mA, this device can provide high efficiency.
NLSF595DTR2 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -55°C~125°C TA
Frequency of 150MHz
Supply voltage of 3.3V
NLSF595DTR2 Applications
There are a lot of ON Semiconductor NLSF595DTR2 LED Driver ICs applications.
- Street lighting
- Stage Lighting and Signage
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Medical surgery lighting
- General lighting
- LED Lightings for Inspection Devices
- Museum lighting
