NLSF595DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Subcategory | Display Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSF595 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 2.5/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 450mW |
| Output Current | 12mA |
| Max Supply Current | 75mA |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 7V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 12mA |
| Internal Switch(s) | Yes |
| Number of Segments | 3 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSF595DTR2G Overview
To save space on the board, it has a 16-TSSOP (0.173, 4.40mm Width) package. LED drivers designed using this technology use 8 outputs.The mounting method is Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -55°C~125°C TA.The system operates on the basis of the frequency 150MHz.It is designed to work with 16 terminations.There are 16 pins used to form the base of its configuration.3 segments are present.It's mounted on the way to Surface Mount.A base part number of NLSF595 is associated with this LED driver.It is acceptable to supply voltages of 5.5V.On this device, there are 16 pins.As a result of its characteristics, it is also classified as Display Drivers.This device requires a minimum input voltage of 1.8V.With a minimal supply voltage of 2V, it reaches the highest efficiency levels.Whenever the maximum supply current is allowed, the value reaches 7V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 75mA.Loads can only be powered by 12mA current.This electronic component can fully perform when the switching frequency is 1MHz.
NLSF595DTR2G Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -55°C~125°C TA
Frequency of 150MHz
Supply voltage of 3.3V
Switching frequency of 1MHz
NLSF595DTR2G Applications
There are a lot of ON Semiconductor NLSF595DTR2G LED Driver ICs applications.
- Other Electronic Devices
- Amusement Machines
- Refrigeration lighting
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- OLED power supply for portable equipment
- Museum lighting
