NLSF595MNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Manufacturer Package Identifier | QFN−16 MN SUFFIX CASE 485G−01 ISSUE B |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 50mA |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSF595 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 450mW |
| Output Current | 50mA |
| Max Supply Current | 75mA |
| Max Output Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 12mA |
| Min Output Voltage | 0V |
| Max Output Power | 450mW |
| Internal Switch(s) | Yes |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSF595MNR2G Overview
Its 16-VFQFN Exposed Pad package is used to save board space. Using this LED driver, there are 8 outputs.As far as mounting is concerned, Surface Mount is adopted.When it emerges as a Linear, it shows high-performance and reliability.This LED driver can be operated at a temperature of -55°C~125°C TA. As a result, it operates on the basis of frequency 150MHz.It is designed to work with 16 terminations.There are 16 pins used to form the base of its configuration.A total of 3 segments are estimated.It has been mounted on Surface Mount.LED drivers are found under the base part number NLSF595.It is acceptable to supply voltages of 5.5V volts.The device has 16 pins.It is also classified into Display Drivers according to its characteristics.The system operates at a minimum supply voltage of 2V in order to achieve maximum efficiency.This device is able to provide high efficiency when the maximal supply current should be less than 75mA.In this case, the load can only be supplied with 50mA current.It is important to keep the output voltage below 5.5V.The voltage it outputs stays at 0V.
NLSF595MNR2G Features
Available in the 16-VFQFN Exposed Pad package
Operating temperature of -55°C~125°C TA
Frequency of 150MHz
Supply voltage of 3.3V
NLSF595MNR2G Applications
There are a lot of ON Semiconductor NLSF595MNR2G LED Driver ICs applications.
- Stage Lighting and Signage
- OLED power supply for portable equipment
- Down lighting
- Linear fluorescent
- Amusement Machines
- LED Lightings for Inspection Devices
- Street lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
