NLSV2T244DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | NLSV2T244 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | -500mV |
| Propagation Delay | 1.6 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 3.3 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV2T244DR2G Overview
A package called 8-SOIC (0.154, 3.90mm Width) contains it.Tape & Reel (TR) is the packaging method.Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Level translators has the translator type Voltage Level.Mounting this electronic component follows the Surface Mount method.Electrical device with type Unidirectional channel.A temperature of -40°C~85°C TA is used for operation.The circuit's superior flexibility is achieved through the use of 1 circuits.Usually, when a transmission line is terminated, there are 8 termination points used.There is a base part number NLSV2T244 that refers to the related parts.Level translators is powered by a 3.3V supply.The pin count of this device is 8.The board has 8 pins.Level translators supports a maximum supply voltage of 5.5V.A minimal voltage of -500mV is needed to operate it.In the VCCA, the supply rail is set to 0.9V~4.5V.From 0.9V~4.5V, the supply rail of the VCCB is configured.Mounting this electronic component is done using the Surface Mount method.Channel count is 2.This object belongs to the category of Other Interface ICs.Level translators consumes 1μA of quiescent current wLevel translatorshout being affected by external factors. Operating can ensure that Over Voltage Protection, Power-Off Protection is achieved.
NLSV2T244DR2G Features
8-SOIC (0.154, 3.90mm Width) package
1 circuits
8 pin count
8 pins
NLSV2T244DR2G Applications
There are a lot of ON Semiconductor NLSV2T244DR2G voltage translators & level shifters applications.
- MDIO
- Infotainment Head Unit
- One Assembly and Test Site
- Industrial equipment
- I2C
- Debouncing a mechanical switch
- TVs
- One Assembly
- Printers and Other Peripherals
- Public Signage
