NLSV2T244MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Number of Pins | 8 |
| Weight | 9.49709mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSV2T244 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Propagation Delay | 5.3 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 3.3 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Height | 500μm |
| Length | 1.8mm |
| Width | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV2T244MUTAG Overview
Embedded in the 8-UFDFN package, it is available for you to use.A Tape & Reel (TR) package is used to package it.Level translators uses Tri-State, Non-Inverted as the output.Its translator type is Voltage Level.Electronic parts are mounted using the Surface Mount method.This electrical device has a Channel type of Unidirectional.There is -40°C~85°C TA operating temperature.The superior flexibility of the system is achieved through its use of 1 circuits.To end a transmission line, there are 8 types of termination that can be used.There is a base part number NLSV2T244 that refers to the related parts.In order to power the device, a voltage supply of 3.3V is required.Level translators is equipped wLevel translatorsh 8 pin count.Level translators has 8 pins.There is a maximum voltage of 4.5V supported.With a minimum supply voltage of 900mV, it operates.0.9V~4.5V is the supply rail configuration on the VCCA.Level translators is configured from 0.9V~4.5V for the VCCB supply rail.Level translators has been mounted wLevel translatorsh the method of Surface Mount.2 is the number of channels available in the system.Level translators is part of Other Interface ICs.Level translators consumes 1μA of quiescent current wLevel translatorshout being affected by external factors. Operating can ensure that Over Voltage Protection, Power-Off Protection is achieved.
NLSV2T244MUTAG Features
8-UFDFN package
1 circuits
8 pin count
8 pins
NLSV2T244MUTAG Applications
There are a lot of ON Semiconductor NLSV2T244MUTAG voltage translators & level shifters applications.
- MDIO
- Handset
- Personal computers
- General purpose I/O level shifting
- Wireless and Telecom Infrastructures
- Industrial
- Public Signage
- Industrial equipment
- One Fabrication Site
- Enterprise
