NLSV4T240MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFQFN |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSV4T240 |
| Pin Count | 12 |
| Output Type | Tri-State, Inverted |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 3.3 ns |
| Family | 4T |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV4T240MUTAG Overview
Level translators is integrated into the 12-UFQFN package.Packaged as Tape & Reel (TR).Tri-State, Inverted is used for the output it is configured with.Its translator type is Voltage Level.Surface Mount is the way in which this electronic part is mounted.In this electrical device, the Channel type is Unidirectional.There is -40°C~85°C TA operating temperature.In order to achieve its superior flexibility, 1 circuits are used.As part of the transmission line termination process, there are a total of 12 terminations.Parts that are related to NLSV4T240 can be identified based on its base part number.In order for it to operate, it needs to be powered by a voltage of 1.2V.Level translators is equipped wLevel translatorsh 12 pin count.Level translators is designed wLevel translatorsh 12 pins.There are 4 bits in this electronic part.There is a maximum voltage of 4.5V supported.This device requires a minimum voltage of 900mV.From 0.9V~4.5V, the supply rail of the VCCA is configured.From 0.9V~4.5V, the supply rail of the VCCB is configured.The mount method is Surface Mount.4 is the number of channels.There is a logic IC BUS DRIVER used in the system.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.This electronic device belongs to the family of 4T.Without external influence, it consumes 4μA of quiescent current.In order to ensure Over Voltage Protection, Power-Off Protection during operation, there are several things to consider.
NLSV4T240MUTAG Features
12-UFQFN package
1 circuits
12 pin count
12 pins
NLSV4T240MUTAG Applications
There are a lot of ON Semiconductor NLSV4T240MUTAG voltage translators & level shifters applications.
- Tablet PCs
- Handset
- One Fabrication Site
- TVs
- Test Site
- Extended Product Life Cycle
- Controlled Baseline
- Industrial
- Motor Drives
- Eliminate slow or noisy input signals
