NLSV4T244DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | NLSV4T244 |
| Pin Count | 14 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | -500mV |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 1.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.3 ns |
| Family | 4T |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV4T244DR2G Overview
14-SOIC (0.154, 3.90mm Width) contains it.A Tape & Reel (TR) package is used to package it.Tri-State, Non-Inverted is the output configured for it.Level translators has the translator type Voltage Level.Mounting this electronic component follows the Surface Mount method.Unidirectional is the Channel type of this electrical device.Level translators operates at -40°C~85°C TA.Due to its superior flexibility, it uses 1 circuits.There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Based on this base part number NLSV4T244, its related parts can be identified.Power comes from a voltage of 1.2V.A total of 14 pins are included.The board has 14 pins.The design of this electronic part contains 4 bits.There is a maximum voltage of 5.5V supported.The minimal voltage for operation is -500mV.A VCCA supply rail is configured as 0.9V~4.5V.From 0.9V~4.5V, the supply rail of the VCCB is configured.The way of mounting this electronic part is Surface Mount.4 is the number of channels.As for the logic IC it uses, it is a BUS DRIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the 4T family.There are no external factors that affect it, so it consumes 4μA quiescent current.Operating with Over Voltage Protection, Power-Off Protection is possible.
NLSV4T244DR2G Features
14-SOIC (0.154, 3.90mm Width) package
1 circuits
14 pin count
14 pins
NLSV4T244DR2G Applications
There are a lot of ON Semiconductor NLSV4T244DR2G voltage translators & level shifters applications.
- Available in Military (-55°C to 125°C)
- Data and Clock Transmission Over Backplane
- Notebook
- One Fabrication Site
- Public Signage
- Signaling Level Conversion for Clock or Data
- Smartphone
- UART
- Desktop PC
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
