NLSV4T244MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFQFN |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLSV4T244 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Number of Ports | 2 |
| Nominal Supply Current | 4μA |
| Number of Bits | 4 |
| Propagation Delay | 1.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.3 ns |
| Family | 4T |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Ambient Temperature Range High | 105°C |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Height | 550μm |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV4T244MUTAG Overview
In the package 12-UFQFN, it can be found.Tape & Reel (TR) is the way in which it is packaged.Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.There is Voltage Level translator type for this electrical device.The electronic part is mounted using the Surface Mount method.This electrical device has channel type Unidirectional.Operation is performed at -40°C~85°C TA.Its superior flexibility is achieved by using 1 circuits.Transmission lines can be terminated using 12 terminations to end them.Based on this base part number NLSV4T244, its related parts can be identified.Level translators is powered from a supply voltage of 1.2V.There are 12 pins on this device.In addition, it is designed with a pin number of 12.4 Bits are used in the design of this electronic part.There is a maximum voltage of 4.5V supported.The minimal voltage for operation is 900mV.The VCCA supply rail is configured from 0.9V~4.5V.Level translators is configured from 0.9V~4.5V for the VCCB supply rail.The way of mounting this electronic part is Surface Mount.4 is the number of channels.Logic ICs it uses are of the BUS DRIVER type.2 terminations are possible, which each match the transmission line's characteristic impedance.Electronic devices like this belong to the family 4T.Level translators consumes 4μA quiescent current and is not affected by external factors.Whenever the operation is performed, Over Voltage Protection, Power-Off Protection will be guaranteed.Currently, it has an output configuration of 1.
NLSV4T244MUTAG Features
12-UFQFN package
1 circuits
12 pin count
12 pins
1 outputs
NLSV4T244MUTAG Applications
There are a lot of ON Semiconductor NLSV4T244MUTAG voltage translators & level shifters applications.
- Eliminate Slow or Noisy Input Signals
- One Fabrication Site
- Desktop PC
- Wearable Health and Fitness Devices
- Handset
- Debouncing a Mechanical Switch
- Industrial Equipment
- Infotainment Head Unit
- Printers and Other Peripherals
- SDIO
