NLSX3018DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLSX3018 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | -500mV |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 160 ns |
| Logic Function | Translator |
| Data Rate | 110Mbps |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 1.3V~4.5V |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSX3018DTR2G Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it.Level translators is packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Translator type Voltage Level is assigned to this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.A Bidirectional channel type is associated with this electrical device.The temperature used for operation is -40°C~85°C TA.1 circuits are used to achieve its superior flexibility.Ending a transmission line involves 20 terminations.According to the base part number NLSX3018, its related parts can be founded.This device is powered by a supply voltage of 3.3V which is applied to it.A total of 20 pins are included.With 20 pins, it is designed.An electronic part with 4 bits is designed.Voltages above 5.5V are supported.In order for the machine to operate, the supply voltage must be -500mV.0.9V~4.5V is the supply rail configuration on the VCCA.In the VCCB, the supply rail is set to 1.3V~4.5V.Surface Mount is used for mounting.There are a total of 8 channels.The logic IC it adopts is BUS DRIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.As long as Auto-Direction Sensing is ensured, operations will succeed.
NLSX3018DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
1 circuits
20 pin count
20 pins
NLSX3018DTR2G Applications
There are a lot of ON Semiconductor NLSX3018DTR2G voltage translators & level shifters applications.
- ADAS Fusion
- I2C / SMBus
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- One Fabrication Site
- Controlled Baseline
- Available in Military (-55°C to 125°C)
- Monitors
- Eliminate slow or noisy input signals
- One Assembly and Test Site
- Debouncing a Mechanical Switch
