NLSX3373MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLSX3373 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Open Drain |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 1 μs |
| Logic Function | Translator |
| Data Rate | 8Mbps |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~4.1V |
| Voltage - VCCB | 1.65V~4.5V |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSX3373MUTAG Overview
Embedded in the 8-UFDFN package, it is available for you to use.Tape & Reel (TR) is the way in which it is packaged.This output uses Open Drain.There is Voltage Level translator type for this electrical device.Surface Mount is the method used for mounting this electronic part.Bidirectional is the Channel type of this electrical device.-40°C~85°C TA is the operating temperature.Due to its superior flexibility, it uses 1 circuits.When it comes to terminating a transmission line, there are 12 terminations.Parts related to a base part number NLSX3373 are designated by the same number.There is a voltage supply of 1.8V which powers the device.Pin count is 8.8 pins are used in its design.Electronic parts with 2 bits are designed for this application.There is a maximum voltage of 4.5V supported.This device requires a minimum voltage of 1.65V.1.2V~4.1V is the configuration of the VCCA supply rail.The VCCB supply rail is configured from 1.65V~4.5V.Mounting this electronic component is done using the Surface Mount method.Level translators is 2 channels.A BUS DRIVER logic IC is used.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.When operating, Auto-Direction Sensing can be ensured.
NLSX3373MUTAG Features
8-UFDFN package
1 circuits
8 pin count
8 pins
NLSX3373MUTAG Applications
There are a lot of ON Semiconductor NLSX3373MUTAG voltage translators & level shifters applications.
- Enterprise and communications
- Driving Indicator LEDs or Buzzers
- SDIO
- GPIO
- Available in Military (-55°C to 125°C)
- General purpose I/O level shifting
- I2C / SMBus
- Eliminate slow or noisy input signals
- Smartphone
- Eliminate Slow or Noisy Input Signals
