NLSX4373MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Number of Pins | 8 |
| Weight | 9.49709mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | NLSX4373 |
| Pin Count | 8 |
| Output Type | Open Drain, Tri-State |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1 μs |
| Logic Function | Translator |
| Data Rate | 20Mbps |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Control Type | ENABLE LOW |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.5V~5.5V |
| Voltage - VCCB | 1.5V~5.5V |
| Height | 500μm |
| Length | 1.8mm |
| Width | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSX4373MUTAG Overview
The 8-UFDFN package contains it.Packaged as Tape & Reel (TR).In its configuration, Open Drain, Tri-State is used as the output.There is a translator type of Voltage Level for this electrical device.Mounting this electronic component follows the Surface Mount method.This electrical device has a Channel type of Bidirectional.-40°C~85°C TA is the operating temperature.1 circuits are used to achieve its superior flexibility.There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Parts related to a base part number NLSX4373 are designated by the same number.Level translators is powered by a 1.8V supply.Level translators is equipped wLevel translatorsh 8 pin count.Level translators has 8 pins.Electronic parts are designed with a number of bits of 1.Voltages up to 5.5V can be supplied.A voltage of 1.5V is the minimum supply voltage required for it to operate.There is a configuration of 1.5V~5.5V for the VCCA supply rail.A VCCB supply rail is configured as 1.5V~5.5V.This electronic part is mounted in the way of Surface Mount.Channel count is 2.A BUS DRIVER logic IC is used.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.When operating, Auto-Direction Sensing can be ensured.In view of its reliable performance, this device can be considered suitable for TR.
NLSX4373MUTAG Features
8-UFDFN package
1 circuits
8 pin count
8 pins
NLSX4373MUTAG Applications
There are a lot of ON Semiconductor NLSX4373MUTAG voltage translators & level shifters applications.
- Controlled Baseline
- One Fabrication Site
- Data and Clock Transmission Over Backplane
- Personal Electronics
- Desktop PC
- Personal computing
- Available in Military (–55°C/125°C) Temperature Range
- Enterprise and communications
- Driving Indicator LEDs or Buzzers
- Extended Product Life Cycle
