NLSX5012DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Auto-Direction Sensing, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLSX5012 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 2.5μA |
| Propagation Delay | 10 ns |
| Quiescent Current | 2.5μA |
| Turn On Delay Time | 35 ns |
| Logic Function | Translator |
| Data Rate | 100Mbps |
| Halogen Free | Halogen Free |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSX5012DMR2G Overview
In the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it can be found.Level translators is packaged in the way of Tape & Reel (TR).Level translators is configured wlevel translatorsh an output of Tri-State, Non-Inverted.Level translators is the Voltage Level type of translator that is used in this electrical device.Surface Mount is used to mount this electronic part.In this electrical device, the Channel type is Bidirectional.The operating temperature is -55°C~125°C TA.To achieve its exceptional flexibility, it relies on 1 circuits.Transmission lines can be terminated using 8 terminations to end them.Parts that are related to NLSX5012 can be identified based on its base part number.A supply voltage of 3.3V is used to power the device.8 pins are present on this board.Level translators has 8 pins.The maximum supply voltage is 4.5V.This device requires a minimum voltage of 900mV.The VCCA supply rail is configured from 0.9V~4.5V.The VCCB supply rail is configured from 0.9V~4.5V.Electronic parts are mounted using Surface Mount.2 channels are available.As part of Other Interface ICs, it belongs.Without external influences, it consumes 2.5μA of quiescent current.Auto-Direction Sensing, Power-Off Protection can be ensured when operating.
NLSX5012DMR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
8 pins
NLSX5012DMR2G Applications
There are a lot of ON Semiconductor NLSX5012DMR2G voltage translators & level shifters applications.
- Debouncing a mechanical switch
- MDIO
- Routers (Telecom Switching Equipment)
- Product Traceability
- ADAS Fusion
- Printers and Other Peripherals
- One Assembly and Test Site
- Product Traceability
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- I2C / SMBus
