NLV14013BDTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 14MHz |
| Turn On Delay Time | 50 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
NLV14013BDTR2G Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Differential. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 3V~18V volts, it operates. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 4000B series. Its output frequency should not exceed 14MHz Hz. In total, it contains 2 elements. It consumes 4μA of quiescent Currently, there are 14 terminations. This D latch belongs to the family of 4013. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. It is mounted in the way of Surface Mount. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V.
NLV14013BDTR2G Features
Tape & Reel (TR) package
4000B series
14 pins
NLV14013BDTR2G Applications
There are a lot of ON Semiconductor NLV14013BDTR2G Flip Flops applications.
- Modulo – n – counter
- Control circuits
- Memory
- Test & Measurement
- Divide a clock signal by 2 or 4
- Reduced system switching noise
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- Power down protection
- Supports Live Insertion
