NLV14051BDTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Base Part Number | NLV14051B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Logic Function | Demux, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| -3db Bandwidth | 17MHz |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV14051BDTR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. The electronic part delivers high-quality output through its 8 channels. There is an electrical component included in the 16 series. Circuits number 1 make up this analogue multiplexer. Try searching for NLV14051B variants of the analog switch ic. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. A low voltage of 3V should be applied to the electronic component. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. The 8 inputs need to be operated in order to work. It comes from the Automotive, AEC-Q100 series.
NLV14051BDTR2G Features
8 Channels
-3db Bandwidth: 17MHz
NLV14051BDTR2G Applications
There are a lot of ON Semiconductor NLV14051BDTR2G Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- PDH Multiplexers
- FTTH
- New designs requiring multiplexer functions
- Precision data acquisition
- RGB switches
- Residential Gateways, Home Gateway/Router
- SONET/SDH ADM
- Cell phones
- Microprocessor controlled systems
