NLV14076BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 12MHz |
| Propagation Delay | 180 ns |
| Quiescent Current | 20μA |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV14076BDR2G Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 3V~18Vvolts. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of Automotive, AEC-Q100series FPGA. It should not exceed 12MHzin its output frequency. In total, there are 1 elements. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. Its input capacitance is 5pFfarads. Surface Mount mounts this electronic component. It is designed with 16 pins. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. There is a consumption of 20μAof quiescent current from it.
NLV14076BDR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100 series
16 pins
NLV14076BDR2G Applications
There are a lot of ON Semiconductor NLV14076BDR2G Flip Flops applications.
- ESD performance
- Supports Live Insertion
- Storage registers
- Frequency division
- ESCC
- Set-reset capability
- Bounce elimination switch
- Parallel data storage
- Computing
- ATE
